How Much Do Masons Charge in Ghana? Blockwork & Plastering

Masons in Ghana usually charge for labour by the square metre or by the block in 2026: roughly GHS 60 to GHS 150 per m² for blockwork and GHS 40 to GHS 90 per m² for plastering. Many also work on a day rate or a full contract for a whole job. Materials — blocks, cement, sand — are almost always on top.

These are typical ranges, not fixed prices. What you pay depends on the wall area, the block type, and whether you're paying labour-only or a full supply-and-build. This guide breaks down mason rates in Ghana for 2026 so you can budget your build or renovation and get an accurate quote before work starts.

What masons charge in Ghana (2026)

Ghanaian masons (also called bricklayers) price work three ways: per unit (per block or per m²), a day rate, or a contract price for the whole job. Most also expect you to supply the blocks, cement and sand, or to pay for them separately from labour.

Task	Typical 2026 labour rate
Blocklaying	GHS 3 – 8 per block, or GHS 60 – 150 per m²
Plastering	GHS 40 – 90 per m²
Screeding (floor base)	GHS 40 – 100 per m²
Tiling	GHS 60 – 150 per m²
Day rate (mason)	GHS 150 – 400 per day

These are labour figures only. Blocks, cement, sand and tiles are separate, and their prices move with the cedi. Rates in Accra and Tema tend to sit a little above Kumasi and smaller towns for the same work.

Rates by task: blockwork, plastering, screeding, tiling

Here's roughly what common masonry tasks cost in Ghana in 2026. Each is a starting range that shifts with wall area, block type, and finish.

• Blocklaying — GHS 3 – 8 per block laid, or GHS 60 – 150 per m² of wall. Bigger, cleaner runs cost less per unit than fiddly, broken-up walls.
• Plastering — GHS 40 – 90 per m². A smooth, even finish on a large wall is efficient; patching and detailed edges cost more.
• Screeding — GHS 40 – 100 per m² to lay the level floor base before tiling.
• Tiling — GHS 60 – 150 per m² labour, plus the tiles and adhesive. Large-format and patterned layouts take longer and cost more.
• Foundation and footing work — usually a contract price, sized to the building. Get this quoted against your drawing.

If your job isn't listed, send your wall measurements or a photo and your drawing to a verified mason and ask for a range before they visit.

How to estimate your wall area

Most masonry is priced per square metre, so a rough measurement turns a vague quote into an accurate one. Measure the length of the wall and multiply by its height to get the area in square metres. For a room, add up all the walls, then subtract the door and window openings. A wall six metres long and three metres high is about 18 m² — at GHS 40 to GHS 90 per m² for plastering, that's roughly GHS 720 to GHS 1,620 in labour. Do the same sum for blockwork or tiling and you'll walk into the conversation knowing whether a quote is fair.

Labour-only vs supply-and-build

There are two ways to hire a mason in Ghana, and the difference matters for your budget.

Labour-only means you buy and deliver the blocks, cement, sand and water, and the mason charges only for skill and time. This gives you control over material quality and cost, but you handle the logistics and any shortfall.

Supply-and-build (contract) means the mason prices the whole job — materials and labour together — and delivers a finished wall or floor. It's simpler and puts the sourcing on them, but you should agree exactly what materials and quality are included, or a low quote can hide cheap blocks.

For most homeowners, labour-only works well for small jobs where you can source materials, while a contract suits larger builds where you'd rather not manage deliveries.

What moves the price: block type and wall area

A few things swing a masonry quote up or down:

• Block type. Solid blocks, hollow blocks, and different sizes carry different rates and use different amounts of mortar.
• Wall area and shape. Long straight runs are efficient. Lots of corners, openings and short sections slow the mason down and raise the per-metre cost.
• Height and access. Upper floors and scaffolding add time.
• Finish standard. A wall that will be tiled or precisely plastered demands more care than a rough boundary wall.
• Site conditions. Water availability, delivery access, and ground quality all affect the day.

Day rate vs contract: which to choose

A day rate (typically GHS 150 – 400 per mason per day in 2026) suits small, hard-to-measure jobs — patching, repairs, or work where the scope will shift as you go. The risk is that a slow worker costs you more days.

A contract price for the whole job gives you a fixed figure and shifts the time risk to the mason. It suits clear, measurable work like a defined wall or a room to plaster. Agree the scope, the materials, and the finish in writing so "the wall" means the same thing to both of you.

Find a verified mason near you

On a build, a mason often controls your materials and your money before you can see the finished result — so who you hire matters as much as the rate. Every mason on FixAm is Ghana Card-verified with a selfie match and reference checks before they take a job.

You browse pros near you, see their trade and area, and message them directly. There's no middleman and no booking fee — you agree the price with the mason and pay them. Hire masons in Accra, find masons in Kumasi, or browse a verified mason in Ghana near you. If your job also needs finishing, hire a tiler or a POP installer for the ceiling.

Get a free quote on WhatsApp from a verified mason near you today.